38/357 and 9 MM 125 Truncated Cone Flat Point - Beveled Base Coated Bullet
This bullet can be sized 0.356, 0.357, and 0.358.
If you are wanting a 9 MM bullet, select 0.356 sizing.
Works well with Revolvers, Semi Auto Pistols and Rifles and Lever Action Rifles.
1 Review Hide Reviews Show Reviews
Had been looking for a bullet for my 9mm revolver that suffered from crimp jump with regular 9mm bullets and normal taper crimp. No amount of tweaking resolved the issue. Came across your bullets that you offer in 0.357 diameter which was perfect for my 9mm Pitbull. Since these are 38 Special they have a crimp groove. So with my 9mm die which normally taper crimps, I positioned the case mouth right on the groove and applied a crimp which turns out to be a slight roll crimp. Positioning on the groove allows the bottom portion of the bullet to sit no deeper than a normal 9mm. My COL runs around 1.050. I load 3.3 grains of Bullseye which produces 860 fps from my 2 inch barrel. There s no crimp jump and the bullets are accurate. Recoil is minimal. I shot 75 rounds today with no leading, just some Bullseye soot. The barrel cleaned up easily with CLP. I like the 12 BHN which I feel helps seal the bullet in the barrel. Also, the Hy-Tek coating is substantial and not like others that have a thin see-through coat. Others that are having crimp jump issues with their 9mm revolvers should try this bullet.